Room plan, drawn to scale
Your teaching file

Room plan, drawn to scale

One room at a time, drawn to scale in your browser: the walls, the door, the demonstration point, and the tables and stations with the space a standing person needs in front of them. Try two layouts and print the one you choose.

On a first pass the plan is optional if you know the room and have taught in it, and close to essential if you have not seen it. Draw the outline first, then the door, then the demonstration point, then the stations. A reader working on graph paper loses nothing but the scale arithmetic, the path check and the ability to print the layout at true size; what matters is that the drawing exists before the day rather than after it.

How to use the plan

  • Measure first, in this order. The length and width of the room along the inside face of the walls; the position and width of the door and which way it swings; anything fixed to the floor or the wall that you cannot move, including the sink, the screen, the columns and the outlets; then the size of one table or bench.
  • Place the demonstration point before the stations. It is the thing everybody has to see, so the stations arrange themselves around it rather than the other way round.
  • Give each station its standing room. The in-use depth is the space a person working at it occupies, drawn dashed in front. A bench with nobody at it fits almost anywhere; a bench with a person at it is twice as deep.
  • Mark the gaps people will walk down as paths. Anything under the path width, which you can change on the page, is flagged and listed. The default is 36 inches, and what your venue requires is a question for the venue.
  • Pieces can come in from your materials sheet. The "From your materials sheet" list reads the materials sheet, and brings an item in at the width, depth and standing room you entered there. An item with those columns blank arrives at a placeholder size, which you then correct on the plan.
  • Draw a second option and compare. Copying an option makes an independent copy. Two worth comparing: stations in rows with a central gangway, and stations around the edge with the middle clear for gathering.
  • Then sit in the worst seat. The drawing finds fit problems; only sitting down finds the sightline problem, as Setting up a room people can actually work in explains.
Fictional example

The example is Priya Raman's borrowed community kitchen: 18 feet by 24, five fixed benches each with thirty inches of standing room, a sink at one end, one door and the outlets along one wall. Its measurements show the gap between the two benches nearest the door flagged as too narrow for a walking path, which is the finding that changed where she puts the people who need the sink.

Limits

A plan drawn to scale checks fit and sightlines in two dimensions. It knows nothing about height, sound, floor loading, temperature, what is bolted down, what the fire code says about exits and aisles, or anything the venue has not told you. Those are settled by a visit, by the room check in Materials and room check, and by the venue itself. The path width is a number you set, not a standard: what width applies to your room comes from the venue and the authorities over it.